Semi-rimless with this Rxs, please suggest

Discussion in 'Optometry Archives' started by Tolerance, Dec 1, 2005.

  1. Tolerance

    Tolerance Guest

    Hi I've being using frames for 20 years. Would like to change to
    semi-rimless if possible with this Rxs. I've been to 2 vision stores
    and the sales clerks tell me it is not possible.
    My rxs is OD +4.00 1.75 x 180
    OS +1.50 sph

    Anyone have any input on this? Is it at all possible to get rimless,
    semirimless in a + rxs?
    thanks for any help
    Tolerance, Dec 1, 2005
    1. Advertisements

  2. Tolerance

    CatmanX Guest

    It is no problem to make this Rx into a nylon fit frame. The issues you do
    need to be aware of is there will be a little increase in thicknes due to
    the edge needing to be 1.5-2.0mm thick at the thinnest point and the
    difference in Rx b/w the 2 eyes/ I personally would use a high index,
    polycarbonate or 1.67 material, grind the lenses for thickness and multicoat
    (always multicoat).

    It adds a little to the cost, but they will look so much better, and
    factored over a year or 2, is not a major expense.


    dr grant
    CatmanX, Dec 3, 2005
    1. Advertisements

  3. Tolerance

    Tolerance Guest

    thanks for the response guys. I'll talk it over with the optometrist
    and see.
    Tolerance, Dec 4, 2005
  4. Tolerance

    CatmanX Guest

    or talk to a different optometrist.

    dr grant
    CatmanX, Dec 5, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.